The FT DX 5000 Series HF/50 MHz 200 Watt
Transceivers are a new Premium Class of Yaesu radios with 2 Independent
Receivers plus many unique options and accessories designed to meet the
Performance Requirements of even the most demanding serious Amateur
Radio operator.
- FT DX 5000 Brief Description
SM-5000 Station Monitor – Optional; 300 Hz Roofing Filter – Optional; ±0.05ppm TXCO – Included.
- FT DX 5000D Brief Description
SM-5000 Station Monitor – Included; 300 Hz Roofing Filter – Optional; ±0.05ppm TXCO – Included.
- FT DX 5000MP Brief Description
SM-5000 Station Monitor – Included; 300 Hz Roofing Filter – Included; ±0.05ppm OCXO – Included.
- Rugged 200 Watt Output Power
The FTDX 5000 robust and high-power Final Amplifier Stage incorporates two super reliable FET, VRF-150
(Drain-Source Voltage 170 V/Gate Source Voltage ±40 V, Total Device Dissipation 300 W) in a push-pull
configuration, offers solid 200 W output (75 W Class A operation).
- Internal Power Supply
All three FTDX 5000 Series radios have their own built-in power supply
- TWO Totally Independent Receivers
All FTDX 5000 Transceivers include Two (2) Totally Independent Receivers to give you Performance
and Flexibility previously only provided by much more expensive radios.
- SUPERB 3rd-Order Dynamic Range & 3rd-Order Intercept Point (IP3)
SSB (2.4kHz BW)
10 kHz SEP.:106 dB, IP3 +40 dBm
CW (500Hz BW)
10 kHz SEP:112 dB, IP3 +40 dBm
2 kHz SEP. :105 dB, IP3 +36 dBm
1 kHz SEP. : 99 dB, IP3 +25 dBm
*VFO-A/Main Receiver @ 14 MHz, IPO1
- Super Sharp “Roofing” Filters
Super sharp “Roofing” filters for VFO-A/Main Receiver.
Filters are Selectable between *300 Hz, 600 Hz, 3 kHz (6-pole crystal filter), 6 kHz, 15 kHz (4-pole MCF)
*300 Hz filter is optional for FTDX 5000 and FTDX 5000D. It is included in the FTDX 5000MP
- High Performance Yaesu Custom-designed 32-bit Floating Point DSP
The legendary high performance Yaesu Custom-designed 32-bit Floating Point DSP based on the TI TMS320C6727B (@300 MHz), one EACH for VFO-A and VFO-B.
- Variable CW Audio Peak Filter & High/Low-Cut Filtering
Variable CW Audio Peak Filter, and High/Low-Cut filtering created through the very latest in DSP technology.
- CW Width: 50/100/150/200/250/300/350/400/450/500 Hz
- CW Pitch Frequency: 300~1050 Hz (10 Hz Steps)
- True Analog Meter Precision
Enjoy the same Huge Size Metering System as the FT DX 9000 series with True Analog Precision and Instant Reaction Time.
- New Function Displays for Ease of Operation
Three Electro Luminescence clear Displays included for easier operation and control of the Sub-Frequency, Graphical Wave and Menu function.
- IF Output Available
IF Output (9 MHz) from VFO-A/Main Receiver
- Practical Level Indication System for Most Important Settings
The FTDX 5000 provides loads of practical Level Indication that clearly show settings of Mic-Gain / RF Power / CW-Pitch / Keyer Speed / Processor Level / VOX Delay Time / Break-In Delay Time.
-They can be controlled ON/OFF independently!
- Introducing the SM-5000 Station Monitor Bandscope
If you need a good Bandscope to enhance your operations, you are going to love our all-new SM-5000 matching station monitor. Included with the Bandscope is a complete, enhanced
stereo speaker system with superb audio quality - the speakers are point at you instead of up into the air above the radio!
- Other Valuable Options
- Yaesu Data Management Unit DMU-2000, and utilize its powerful Audio Scope, Oscilloscope, Spectrum Scope, logging, and Rotator Control capabilities using your own
personally selected and purchased computer display monitor.
- Yaesu External Fully-Automatic Micro-Tuning Units. Three modes available: A (160 m Band), B (80 & 40 m Bands), C (30 & 20 m Bands)
FTDX5000 Brochures download
FTDX5000 Operating Manual download
|
|
|
Specifications subject to change without notice. Specifications guaranteed only within Amateur bands.
Frequency range may be different in some countries.
Some accessories and/or options are standard in certain areas. |